Stadia Wireless Adapter — Web Flasher

Turn a Seeed Studio XIAO ESP32-S3 into a standalone 1000 Hz Stadia Wi-Fi Gamepad + Rumble + 48 kHz Headset + Battery + Auto-BLE-Pairing USB-C dongle directly from your browser.

Install Latest Build via WebSerial

Built automatically from main with ESP-IDF 5.5.4 (dual-OTA layout with rollback safety).

Firmware Version
Loading…
Target Board
XIAO ESP32-S3
Commit
Loading…
Built (UTC)
Loading…
WebSerial requires Chrome, Edge, or Brave on desktop. Download the binary below to flash via esptool instead. WebSerial requires HTTPS. Open this page via GitHub Pages (https://). Download OTA .bin Download Merged .bin Trigger Rebuild on GitHub

Quick Start (3 Steps)

  1. Enter Bootloader Mode: Hold the B (BOOT) button on your XIAO ESP32-S3, plug it into USB-C (or tap R), then release B.
    Already running v1.5.0+? Hold Assistant + Capture + Y (2 s) or click Enter USB Bootloader at http://192.168.4.1 — no button press needed.
  2. Flash: Click Connect & Install Firmware above, choose the USB JTAG/serial debug unit port, and wait for flashing to complete. Unplug and replug the dongle.
  3. Auto-Pair Your Controller: Put any Wi-Fi Stadia Controller into orange-blink setup mode near the dongle. The ESP32-S3 automatically pairs it over Bluetooth LE within seconds — no phone app or PC tool required.
Prefer CLI flashing (esptool)?
python3 -m esptool --chip esp32s3 --baud 460800 \
  --before default-reset --after hard-reset write-flash \
  --flash-mode dio --flash-freq 80m --flash-size 8MB \
  0x0 stadiacast-esp32-merged.bin
Updating later over Wi-Fi (OTA) — no USB cable flashing needed

Once flashed with v1.5.0+, connect any phone or PC to the dongle's Wi-Fi (STADIA_ESP32 / stadiacast) and open http://192.168.4.1 to upload stadiacast-esp32.bin in your browser, configure settings, or save your Home Wi-Fi for 1-button controller updates (Assistant + Capture + B).

Controller Hotkeys

Action Combo Feedback
Stadia HID Mode (18d1:9400) Hold Assistant + Capture + A (2 s) 1 long buzz, reboots
XInput Mode (1209:9401) Hold Assistant + Capture + X (2 s) 2 long buzzes, reboots
Home Wi-Fi / LAN Auto-OTA Hold Assistant + Capture + B (2 s) 3 buzzes, downloads latest release
USB Serial / Flash Mode Hold Assistant + Capture + Y (2 s) 4 buzzes, reboots to USB-Serial
Mic Mute Toggle Tap Assistant (XInput) or Assistant + Capture 1 buzz = muted, 2 = live
Mic Gain (1.0x–2.5x) Assistant + Capture + D-Pad Up / Down 1–4 quick taps
Stick Deadzone (0% / 4% / 8%) Assistant + Capture + D-Pad Right 1–3 quick taps
Check Battery Level Assistant + Capture + D-Pad Left 1–4 taps (quartile)